Prime Beech Kitchen Worktops. High quality, low prices, FREE UK delivery.

Prime Beech Kitchen Worktops

Prime Beech hardwood kitchen worktops from our Second Nature collection, superior quality grade A worktops with 40mm wide staves, supplied square edged and sanded to a super smooth 150 grit finish. Direct from the manufacturer saving you up to 60% off high street kitchen studio prices with free* 48 hour UK delivery. Worktops are supplied unfinished and will require oiling prior to installation.

Unsure about your choice of hardwood worktops? Why not try a free sample. We will refund the purchase price of the sample when you proceed with placing a worktop order. Refunds are made on a one for one basis. To place an order select the quantity required and click the "add to cart" button at the bottom of the page.

Second Nature Prime beech worktop sample

£3.40 ex vat £4.00 inc vat
Ref: PB-sample
Samples measure approximately 100mm x 100mm and are supplied with an oiled finish.

Select quantity:

Please select your choice of worktops from the list below.

Prime beech worktop 3m x 620mm x 27mm

£106.40 ex vat £125.02 inc vat
Ref: WT3/620/27PB
All our worktops are of the very highest quality high pressure glued, finger jointed staves supplied square edged and sanded to a fine 150 grit finish.

Select quantity:

Prime beech worktop 3m x 720mm x 27mm

£124.35 ex vat £146.11 inc vat
Ref: WT3/720/27PB

Select quantity:

Prime beech worktop 4m x 620mm x 27mm

£143.50 ex vat £168.61 inc vat
Ref: WT4/620/27PB

Select quantity:

Prime beech worktop 4m x 720mm x 27mm

£167.45 ex vat £196.75 inc vat
Ref: WT4/720/27PB

Select quantity:

Prime beech worktop 3m x 620mm x 40mm

£144.95 ex vat £170.32 inc vat
Ref: WT3/620/40PB

Select quantity:

Prime beech worktop 3m x 720mm x 40mm

£169.35 ex vat £198.99 inc vat
Ref: WT3/720/40PB

Select quantity:

Prime beech worktop 3m x 960mm x 40mm

£227.50 ex vat £267.31 inc vat
Ref: WT3/960/40PB

Select quantity:

Prime beech worktop 4m x 620mm x 40mm

£194.95 ex vat £229.07 inc vat
Ref: WT4/620/40PB

Select quantity:

Prime beech worktop 4m x 720mm x 40mm

£227.50 ex vat £267.31 inc vat
Ref: WT4/720/40PB

Select quantity:

Prime beech upstand 3m x 80mm x 18mm

£19.10 ex vat £22.44 inc vat
Ref: UP3/80PB
Note: Upstands can only be ordered along with worktops, we will not despatch upstands if not ordered with a worktop.

Select quantity:

Danish oil, 1 litre

£9.99 ex vat £11.74 inc vat
Ref: WOIL1000
We recommend 1 litre of oil for every 3m or 4m worktop that you order.

Select quantity:

Worktop aftercare kit

£8.47 ex vat £9.95 inc vat
Ref: WTACKIT
A worktop after care kit for solid timber worktops. It consists of 250ml Danish oil, 5 de-nibbing pads, an oil applicator cloth and after care instructions.

Select quantity:

Moisture barrier, 750mm x 750mm

£8.95 ex vat £10.52 inc vat
Ref: MB750
For use above appliances, beneath the worktop.We recommend that these are used above all appliances that generate heat/ moisture, eg. fridges, dishwashers, washing machines, etc.

Select quantity:

Quadrout worktop jig, 900mm

£119.12 ex vat £139.97 inc vat
Ref: WJ900
• For cutting across width 400 - 900 mm worktops
• For right and left standard 90º and 45º joints
• For right and left 90º joints where walls are up to 1.5º out of square (28 mm over 1 mº)
• Rout recesses for worktop connecting bolts
• Easy to follow symbols, • Convenient carrying handle
• Fitting instructions supplied
• Craft papers bound with phenolic resin and laminated with a melamine overlay
NOTE: A router and cutter is required for use with this jig, these items are not supplied.

Click here to view large image and instruction manual

Select quantity:

Worktop jig for hot rod grooves

£50.15 ex vat £58.93 inc vat
Ref: WJH
Hot rod jig featuring 3 purpose made grooves which will produce recesses for 300mm, 200mm and 100mm long hot rods. An additional feature is 3 sets of peg holes allowing the jig to be positioned accurately so that the grooves run at 90 degree to the worktop edges.
NOTE: A router and cutter is required for use with this jig, these items are not supplied.

Click here to view large image and instruction manual

Select quantity:

Worktop jig for sloping drainer grooves

£100.30 ex vat £117.85 inc vat
Ref: WJSD
A sloping drainer groove jig for the successful routing of sloping drainage grooves in a natural wood or stone worktop. NOTE: A router and cutter is required for use with this jig, these items are not supplied.

Click here to view large image and instruction manual

Select quantity:

Worktop jig for sink and hob aperture

£100.30 ex vat £117.85 inc vat
Ref: WJSH
The sink and hob aperture jig provides; Left and right hand radius curves at 100, 80, 60 and 40mm
Left and right hand 90 degree angles, Straight edge 480mm long. NOTE: A router and cutter is required for use with this jig, these items are not supplied.

Click here to view large image

Select quantity:


	Installation guide
	Oiling and care guide
	Frequently asked questions

Try before you buy. Free worktop samples