Rubberwood Kitchen Worktops. High quality, low prices, FREE UK delivery.

Rubberwood Kitchen Worktops

Rubberwood hardwood kitchen worktops from our Second Nature collection, superior quality grade A worktops with 40mm wide staves, supplied square edged and sanded to a super smooth 150 grit finish. Direct from the manufacturer saving you up to 60% off high street kitchen studio prices with free* 48 hour UK delivery. Worktops are supplied unfinished and will require oiling prior to installation.

Unsure about your choice of hardwood worktops? Why not try a free sample. We will refund the purchase price of the sample when you proceed with placing a worktop order. Refunds are made on a one for one basis. To place an order select the quantity required and click the "add to cart" button at the bottom of the page.

Second Nature Rubberwood worktop sample

£3.40 ex vat £4.00 inc vat
Ref: HE-sample
Samples measure approximately 100mm x 100mm and are supplied with an oiled finish.

Select quantity:

Please select your choice of worktops from the list below.

Rubberwood worktop 3m x 620mm x 27mm

£75.50 ex vat £88.71 inc vat
Ref: WT3/620/27HE
All our worktops are of the very highest quality high pressure glued, finger jointed staves supplied square edged and sanded to a fine 150 grit finish.

Select quantity:

Rubberwood worktop 3m x 720mm x 27mm

£87.50 ex vat £102.81 inc vat
Ref: WT3/720/27HE

Select quantity:

Rubberwood worktop 4m x 620mm x 27mm

£101.95 ex vat £119.79 inc vat
Ref: WT4/620/27HE

Select quantity:

Rubberwood worktop 4m x 720mm x 27mm

£113.95 ex vat £133.89 inc vat
Ref: WT4/720/27HE

Select quantity:

Rubberwood worktop 3m x 620mm x 40mm

£113.95 ex vat £133.89 inc vat
Ref: WT3/620/40HE

Select quantity:

Rubberwood worktop 3m x 720mm x 40mm

£132.70 ex vat £155.92 inc vat
Ref: WT3/720/40HE

Select quantity:

Rubberwood worktop 3m x 960mm x 40mm

£170.80 ex vat £200.69 inc vat
Ref: WT3/960/40HE

Select quantity:

Rubberwood worktop 4m x 620mm x 40mm

£157.80 ex vat £185.42 inc vat
Ref: WT4/620/40HE

Select quantity:

Rubberwood worktop 4m x 720mm x 40mm

£179.20 ex vat £210.56 inc vat
Ref: WT4/720/40HE

Select quantity:

Rubberwood upstand 3m x 80mm x 18mm

£26.75 ex vat £31.43 inc vat
Ref: UP3/80HE
Note: Upstands can only be ordered along with worktops, we will not despatch upstands if not ordered with a worktop.

Select quantity:

Danish oil, 1 litre

£9.99 ex vat £11.74 inc vat
Ref: WOIL1000
We recommend 1 litre of oil for every 3m or 4m worktop that you order.

Select quantity:

Worktop aftercare kit

£8.47 ex vat £9.95 inc vat
Ref: WTACKIT
A worktop after care kit for solid timber worktops. It consists of 250ml Danish oil, 5 de-nibbing pads, an oil applicator cloth and after care instructions.

Select quantity:

Moisture barrier, 750mm x 750mm

£8.95 ex vat £10.52 inc vat
Ref: MB750
For use above appliances, beneath the worktop.We recommend that these are used above all appliances that generate heat/ moisture, eg. fridges, dishwashers, washing machines, etc.

Select quantity:

Quadrout worktop jig, 900mm

£119.12 ex vat £139.97 inc vat
Ref: WJ900
• For cutting across width 400 - 900 mm worktops
• For right and left standard 90º and 45º joints
• For right and left 90º joints where walls are up to 1.5º out of square (28 mm over 1 mº)
• Rout recesses for worktop connecting bolts
• Easy to follow symbols, • Convenient carrying handle
• Fitting instructions supplied
• Craft papers bound with phenolic resin and laminated with a melamine overlay
NOTE: A router and cutter is required for use with this jig, these items are not supplied.

Click here to view large image and instruction manual

Select quantity:

Worktop jig for hot rod grooves

£50.15 ex vat £58.93 inc vat
Ref: WJH
Hot rod jig featuring 3 purpose made grooves which will produce recesses for 300mm, 200mm and 100mm long hot rods. An additional feature is 3 sets of peg holes allowing the jig to be positioned accurately so that the grooves run at 90 degree to the worktop edges.
NOTE: A router and cutter is required for use with this jig, these items are not supplied.

Click here to view large image and instruction manual

Select quantity:

Worktop jig for sloping drainer grooves

£100.30 ex vat £117.85 inc vat
Ref: WJSD
A sloping drainer groove jig for the successful routing of sloping drainage grooves in a natural wood or stone worktop. NOTE: A router and cutter is required for use with this jig, these items are not supplied.

Click here to view large image and instruction manual

Select quantity:

Worktop jig for sink and hob aperture

£100.30 ex vat £117.85 inc vat
Ref: WJSH
The sink and hob aperture jig provides; Left and right hand radius curves at 100, 80, 60 and 40mm
Left and right hand 90 degree angles, Straight edge 480mm long. NOTE: A router and cutter is required for use with this jig, these items are not supplied.

Click here to view large image

Select quantity:


	Installation guide
	Oiling and care guide
	Frequently asked questions

Try before you buy. Free worktop samples